Mobile carriers can increase their unique frequencies with the use of Raygnal Adjudicative Band Selective Repeaters. In order to improve operators' networks, repeaters can handle 2 sub bands of 2G, 3G or 4G frequency. Operators will also profit from the repeater installation's successful performance due to its superior out-band rejection.
Engineers also installed stylish closets for repeaters to provide low power consumption but effective heat dissipation. Additionally, repeaters will operate in a stable environment thanks to a number of important features including MGC, AGC, and Auto Mute capabilities that are already established to safeguard repeaters, even if they do substantial self-oscillation. Additionally, it is highly practical to use remote control monitoring software to ensure that all installed devices will be monitored.
Features
1. MGC available for both UL & DL.
2. AGC Alarms if interference occurs.
3. Auto shut off once severe self-oscillation.
4. Intelligent mode setting.
6. Antenna isolation testing automatically.
7. High voice quality and fast data transmission.
8. Ideal solution for operators.
Specs
|
Parameters |
Uplink |
Downlink |
|
|
Frequency Range |
LTE800 |
832 ~ 862MHz |
791 ~ 821MHz |
|
GSM&EGSM |
880 ~ 915MHz |
925 ~ 960MHz |
|
|
DCS |
1710 ~ 1785MHz |
1805 ~ 1880MHz |
|
|
WCDMA |
1920 ~ 1980MHz |
2110 ~ 2170MHz |
|
|
LTE2600 |
2500~2570MHz |
2620 ~ 2690MHz |
|
|
Bandwidth |
various bandwidth is available upon request |
||
|
Maximum Gain |
≥ 60dB |
≥ 65dB |
|
|
Output Power |
≥ 10dBm |
≥ 10dBm |
|
|
MGC (Manual Gain Control) |
31dB |
||
|
AGC (Automatic Gain Control) |
≧ 25dB |
||
|
Spurious Emission |
9KHz~1GHz |
≦ -36dBm |
|
|
1GHz~12.75GHz |
≦ -30dBm |
||
|
Inter-modulation Products |
9KHz~1GHz |
≦ -36dBm |
|
|
1GHz~12.75GHz |
≦ -30dBm |
||
|
Noise Figure |
≦ 6dB |
||
|
Out of Band Gain |
±400KHz |
< 50dB |
|
|
±600KHz |
< 40dB |
||
|
±1MHz |
< 35dB |
||
|
±5MHz |
< 25dB |
||
|
VSWR |
≦ 2.0 |
||
|
Group Delay |
≦1μs |
||
|
LED Alarm |
Power LED |
DC ON/OFF |
|
|
AGC LED |
Alarm Red when ALC control over 10dB |
||
|
ISO LED |
Alarm turns Red when ALC≥25dB, RF stop working |
||
|
RF Connector |
N-Female |
||
|
Impedance |
50Ω |
||
|
Power Consumption |
25W |
||
|
Power Supply |
Input: AC 110~240V; Output: DC 9V/5A |
||
|
Operating Temperature |
-10℃~50℃ |
||
|
Environment Conditions |
IP30 |
||
|
Dimensions (Lx W x H) |
228*170*65mm |
||
|
Weight (N.W) |
≤5KG |
||
Hot Tags: adjustive band selective repeater, China adjustive band selective repeater manufacturers, suppliers, factory, LTE signal booster, cell phone 5g signal amplifier, Band Selective Repeater In Networking, Band Selective Repeater Cell, cell signal amplifier, Tetra Band Selective Repeater
