With the use of Raygnal Band Selective Repeaters, mobile carriers can enhance the range of their distinctive frequencies. Repeaters can accommodate 3 sub bands of 3G, or 4G frequency to enhance operators' networks. Due to its greater out-band rejection, the repeater installation's excellent performance will also benefit operators.
In order to equip repeaters with efficient heat dissipation with minimal power usage, engineers also designed fashionable closets. A number of crucial characteristics, including as MGC, AGC, and Auto Mute capabilities that are previously designed to protect repeaters, even if they do significant self-oscillation, will also help repeaters operate in a stable environment. Using remote control monitoring software to make sure that all installed devices will be monitored is also quite useful.
Features
1. MGC available for both UL & DL.
2. AGC Alarms if interference occurs.
3. Auto shut off once severe self-oscillation.
4. Intelligent mode setting.
6. Antenna isolation testing automatically.
7. High voice quality and fast data transmission.
8. Ideal solution for operators.
Specs
|
Parameters |
Uplink |
Downlink |
|
|
Frequency Range |
LTE800 |
832 ~ 862MHz |
791 ~ 821MHz |
|
GSM&EGSM |
880 ~ 915MHz |
925 ~ 960MHz |
|
|
DCS |
1710 ~ 1785MHz |
1805 ~ 1880MHz |
|
|
WCDMA |
1920 ~ 1980MHz |
2110 ~ 2170MHz |
|
|
LTE2600 |
2500~2570MHz |
2620 ~ 2690MHz |
|
|
Bandwidth |
various bandwidth is available upon request |
||
|
Maximum Gain |
≥ 60dB |
≥ 65dB |
|
|
Output Power |
≥ 10dBm |
≥ 10dBm |
|
|
MGC (Manual Gain Control) |
31dB range/1dB step |
||
|
AGC (Automatic Gain Control) |
≧ 25dB |
||
|
Spurious Emission |
9KHz~1GHz |
≦ -36dBm |
|
|
1GHz~12.75GHz |
≦ -30dBm |
||
|
Inter-modulation Products |
9KHz~1GHz |
≦ -36dBm |
|
|
1GHz~12.75GHz |
≦ -30dBm |
||
|
Noise Figure |
≦ 6dB |
||
|
Out of Band Gain |
±400KHz |
< 50dB |
|
|
±600KHz |
< 40dB |
||
|
±1MHz |
< 35dB |
||
|
±5MHz |
< 25dB |
||
|
VSWR |
≦ 2.0 |
||
|
Group Delay |
≦1μs |
||
|
LED Alarm |
Power LED |
DC ON/OFF |
|
|
AGC LED |
Alarm Red when ALC control over 10dB |
||
|
ISO LED |
Alarm turns Red when ALC≥25dB, RF stop working |
||
|
RF Connector |
N-Female |
||
|
Impedance |
50Ω |
||
|
Power Consumption |
25W |
||
|
Power Supply |
Input: AC 110~240V; Output: DC 5.9V/3A |
||
|
Operating Temperature |
-10℃~50℃ |
||
|
Environment Conditions |
IP30 |
||
|
Dimensions (Lx W x H) |
128*170*65mm |
||
|
Weight (N.W) |
≤1.5KG |
||
Hot Tags: band selective repeater antenna, China band selective repeater antenna manufacturers, suppliers, factory, Band Selective Repeater LTE, Band Selective Repeater Firmware, LTE signal booster, antenna booster, Band Selective Repeater Multi, Airtel Signal Booster voice amplifier portable
