The outdoor or donor antenna, the amplifier, and the indoor antenna are the three primary components of an indoor Band Selective Repeater. While an indoor antenna distributes the signal to and from a mobile phone, the donor antenna delivers and receives signals from the tower. Signals from the tower to the phone and those from the phone to the tower are both amplified by the amplifier, also known as a bi-directional amplifier (BDA) or repeater. A coaxial connection connects the donor and indoor antennae to the amplifier. A splitter or coupler is unquestionably essential for deployment if you want to split the signals among several interior locations.
The maximum coverage area of the indoor band selective repeater is 21,000 square feet.
Features
1. MGC available for both UL & DL.
2. AGC Alarms if interference occurs.
3. Auto shut off once severe self-oscillation.
4. Intelligent mode setting.
6. Antenna isolation testing automatically.
7. High voice quality and fast data transmission.
8. Ideal solution for operators.
Specs
|
Parameters |
Uplink |
Downlink |
|
|
Frequency Range |
LTE800 |
832 ~ 862MHz |
791 ~ 821MHz |
|
GSM&EGSM |
880 ~ 915MHz |
925 ~ 960MHz |
|
|
CDMA800 |
824~849MHz |
869~894MHz |
|
|
DCS |
1710 ~ 1785MHz |
1805 ~ 1880MHz |
|
|
WCDMA |
1920 ~ 1980MHz |
2110 ~ 2170MHz |
|
|
LTE2600 |
2500~2570MHz |
2620 ~ 2690MHz |
|
|
Bandwidth |
various bandwidth is available upon request |
||
|
Maximum Gain |
≥ 60dB |
≥ 65dB |
|
|
Output Power |
≥ 10dBm |
≥ 15dBm |
|
|
MGC (Manual Gain Control) |
31dB |
||
|
AGC (Automatic Gain Control) |
≧ 25dB |
||
|
Spurious Emission |
9KHz~1GHz |
≦ -36dBm |
|
|
1GHz~12.75GHz |
≦ -30dBm |
||
|
Inter-modulation Products |
9KHz~1GHz |
≦ -36dBm |
|
|
1GHz~12.75GHz |
≦ -30dBm |
||
|
Noise Figure |
≦ 6dB |
||
|
Out of Band Gain |
±400KHz |
< 50dB |
|
|
±600KHz |
< 40dB |
||
|
±1MHz |
< 35dB |
||
|
±5MHz |
< 25dB |
||
|
VSWR |
≦ 2.0 |
||
|
Group Delay |
≦1μs |
||
|
LED Alarm |
Power LED |
DC ON/OFF |
|
|
AGC LED |
Alarm Red when ALC control over 10dB |
||
|
ISO LED |
Alarm turns Red when ALC≥25dB, RF stop working |
||
|
RF Connector |
N-Female |
||
|
Impedance |
50Ω |
||
|
Power Consumption |
25W |
||
|
Power Supply |
Input: AC 110~240V; Output: DC 9V/5A |
||
|
Operating Temperature |
-10℃~50℃ |
||
|
Environment Conditions |
IP30 |
||
|
Dimensions (Lx W x H) |
228*170*65mm |
||
|
Weight (N.W) |
≤5KG |
||
Hot Tags: indoor band selective repeater, China indoor band selective repeater manufacturers, suppliers, factory, 5G Band Selective Repeater, Single Band Selective Digital Repeater, cellphone booster, Band Selective Repeater Multi, 6G signal booster, Band Selective Repeater Government
