Industrial Cellular Signal Repeaters can help operators improve phone signals for better conversation quality and more fluid data transmission on two cellular network frequency sub bands. Our industrial Cellular Signal Repeaters employ clever algorithms to lessen any potential uplink interference. A repeater installation's outstanding performance will also benefit operators because of its perfect out band of rejection. The ease of installation makes it a fantastic substitute for signal amplification.
The Raygnal Industrial Cellular Signal Repeaters has a 31,000 square foot maximum coverage area.
Features
1. MGC available for both UL & DL.
2. AGC Alarms if interference occurs.
3. Auto shut off once severe self-oscillation.
4. Intelligent mode setting.
6. Antenna isolation testing automatically.
7. High voice quality and fast data transmission.
8. Ideal solution for operators.
Specs
|
Parameters |
Uplink |
Downlink |
|
|
Frequency Range |
LTE800 |
832 ~ 862MHz |
791 ~ 821MHz |
|
GSM&EGSM |
880 ~ 915MHz |
925 ~ 960MHz |
|
|
DCS |
1710 ~ 1785MHz |
1805 ~ 1880MHz |
|
|
WCDMA |
1920 ~ 1980MHz |
2110 ~ 2170MHz |
|
|
LTE2600 |
2500~2570MHz |
2620 ~ 2690MHz |
|
|
Bandwidth |
various bandwidth is available upon request |
||
|
Maximum Gain |
≥ 60dB |
≥ 65dB |
|
|
Output Power |
≥ 10dBm |
≥ 15dBm |
|
|
MGC (Manual Gain Control) |
31dB |
||
|
AGC (Automatic Gain Control) |
≧ 25dB |
||
|
Spurious Emission |
9KHz~1GHz |
≦ -36dBm |
|
|
1GHz~12.75GHz |
≦ -30dBm |
||
|
Inter-modulation Products |
9KHz~1GHz |
≦ -36dBm |
|
|
1GHz~12.75GHz |
≦ -30dBm |
||
|
Noise Figure |
≦ 6dB |
||
|
Out of Band Gain |
±400KHz |
< 50dB |
|
|
±600KHz |
< 40dB |
||
|
±1MHz |
< 35dB |
||
|
±5MHz |
< 25dB |
||
|
VSWR |
≦ 2.0 |
||
|
Group Delay |
≦1μs |
||
|
LED Alarm |
Power LED |
DC ON/OFF |
|
|
AGC LED |
Alarm Red when ALC control over 10dB |
||
|
ISO LED |
Alarm turns Red when ALC≥25dB, RF stop working |
||
|
RF Connector |
N-Female |
||
|
Impedance |
50Ω |
||
|
Power Consumption |
25W |
||
|
Power Supply |
Input: AC 110~240V; Output: DC 9V/5A |
||
|
Operating Temperature |
-10℃~50℃ |
||
|
Environment Conditions |
IP30 |
||
|
Dimensions (Lx W x H) |
228*170*65mm |
||
|
Weight (N.W) |
≤5KG |
||
Hot Tags: industrial cellular signal repeater, China industrial cellular signal repeater manufacturers, suppliers, factory, Distributed amplifier, Band Selective Signal Repeater, 6G signal booster, cell signal amplifier, Cell Booster Network Repeater Mobile phone signal booster, Band Selective Repeater for Easy Setup
