Any of the 3G network systems, including WCDMA2100, AWS1700, PCS1900, UMTS800, etc., can be amplified by mobile signal boosters made by Raygnal. However, how to install a signal booster properly? Let’s follow up some steps as show below:
1. Determine the required signal booster for your location: First, you need to identify the type of booster that will work in your location. You may consult with an expert or research online to identify the right signal booster.
2. Locate the area to install the outdoor antenna: After identifying the appropriate signal booster for your location, find the appropriate position to install the outdoor antenna. This involves selecting the spot with the best potential signal reception for the outdoor antenna.
3. Install the outdoor antenna: Mount the outdoor antenna in the decided position and use screws and mounting brackets to secure it. After securely mounting the antenna, connect it to the signal booster unit using a coaxial cable.
4. Position the indoor antenna: Decide on the location to position the indoor antenna where an adequate signal boost is needed. Place it either on a wall or a flat surface that is elevated for improved signal distribution.
5. Link the indoor and outdoor antennas: Connect the indoor and outdoor antennas with a coaxial cable since this facilitates the flow of the boosted signal within the building.
6. Connect to power: Turn on the booster by connecting it to a suitable power source. The booster should ideally be installed near a power outlet for convenience.
Test the signal: Test the signal in the areas of the house where signal improvement is needed. If the signal is not good enough, adjust the position of the antennas for optimal reception.
Features
1. Compact size with stable performance.
2. MGC available for both UL & DL.
3. AGC Alarms if interference occurs.
4. Auto shut off once severe self-oscillation.
5. LCD display to make operation easily.
6. Cost-effective for practical solutions.
7. Antenna isolation testing automatically.
8. High voice quality and fast data transmission.
9. Simple Structure & Easy installation.
Specs
|
Parameters |
Uplink |
Downlink |
|
|
Frequency Range |
UMTS800 |
830-840MHz |
875-885MHz |
|
WCDMA2100 |
1920~ 1980MHz |
2110~ 2170MHz |
|
|
AWS1700 |
1710 ~ 1755MHz |
2110 ~ 2155MHz |
|
|
PCS1900 |
1850-1910MHz |
1930-1990MHz |
|
|
Operation Bandwidth (-3dB) |
Wide Band |
||
|
Maximum Gain |
60dB |
65dB |
|
|
Output Power |
10dBm |
15dBm |
|
|
MGC (Manual Gain Control) |
31dB range/1dB step |
||
|
AGC (Automatic Gain Control) |
≧25dB |
||
|
Noise Figure |
≤ 6dB |
||
|
VSWR |
≦2.0 |
||
|
Group Delay |
≤1μs |
||
|
LED Alarm |
Power LED |
DC ON/OFF |
|
|
AGC LED |
Red, ALC≥10dB |
||
|
ISO LED |
Red, ALC≥25dB, RF stop working |
||
|
RF Connector |
N-Female |
||
|
Impedance |
50Ω |
||
|
Power Consumption |
5W |
||
|
Power Supply |
Input: AC 110~240V; Output: DC 5.9V/3A |
||
|
Operating Temperature |
-10℃~50℃ |
||
|
Environment Conditions |
IP30 |
||
|
Dimensions (Lx W x H) |
128*170*65mm |
||
|
Weight (N.W) |
≤1.5KG |
||
Hot Tags: mobile signal booster for home, China mobile signal booster for home manufacturers, suppliers, factory, Cell Phone Signal Booster for Home, wall mounted amplifier, Mobile Phone Signal Booster for All Networks, signal amplifier for phone, T Mobile Signal Booster, Mobile Signal Booster power amplifier bluetooth
