Using a 4G signal booster to strengthen weak cellular signals can expand network coverage and boost data transfer rates. The current signals from the base station are recorded, boosted, and then redistributed to areas with spotty or no broadcasts. Customers who are far from the cellular tower or who are in locations where there are signal-blocking objects, such as tall buildings or remote areas, benefit the most from 4G signal boosters in terms of network quality.

How the 4G signal booster is installed depends on the layout of the booster kit you ordered. An amplifier, an indoor antenna, and an outdoor antenna normally make up a 4G signal enhancer.

Features

1. MGC available for both UL & DL.

2. AGC Alarms if interference occurs.

3. Auto shut off once severe self-oscillation.

4. LCD display to make operation easily.

5. Cost-effective for practical solutions.

6. Antenna isolation testing automatically.

7. High voice quality and fast data transmission.

8. Good Heat-dissipation.

Specs

Parameters		Uplink	Downlink
Frequency Range	CDMA800	824-849MHz	869-894MHz
	GSM&EGSM	880 ~ 915MHz	925 ~ 960MHz
	DCS	1710 ~ 1785MHz	1805 ~ 1880MHz
	PCS	1850-1910MHz	1930-1990MHz
Operation Bandwidth (-3dB)		Wide Band
Maximum Gain		60dB	65dB
Output Power		10dBm	10dBm
MGC (Manual Gain Control)		31dB range/1dB step
AGC (Automatic Gain Control)		≧25dB
Spurious Emission	9KHz~1GHz	≦-36dBm
	1GHz~12.75GHz	≦-30dBm
Noise Figure		≤ 6dB
VSWR		≦2.0
Group Delay		≤1μs
LED Alarm	Power LED	DC ON/OFF
	AGC LED	Red, ALC≥10dB
	ISO LED	Red, ALC≥25dB, RF stop working
RF Connector		N-Female
Impedance		50Ω
Power Consumption		5W
Power Supply		Input: AC 110~240V; Output: DC 5.9V/3A
Operating Temperature		-10℃~50℃
Environment Conditions		IP30
Dimensions (Lx W x H)		12817065mm
Weight (N.W)		≤1.9KG