A mobile phone repeater works by receiving weak signals from the mobile tower and amplifying them to improve signal strength in areas with poor reception. It consists of three main components: an external antenna that receives the weak signal from the mobile tower, an amplifier that boosts the signal strength, and an internal antenna that broadcasts the amplified signal in the area.
To install a mobile phone repeater, you need to first identify the area where you have poor signal reception. Then, you need to position the external antenna in a location where it can receive a weak signal from the mobile tower. Next, install the amplifier and connect it to the external antenna and the internal antenna. Finally, position the internal antenna in the area where you need improved signal reception.
It is recommended to install a mobile phone repeater in a location that is well ventilated to prevent overheating. Also, ensure that you follow the manufacturer's instructions for installation to avoid any damage to the equipment or interruptions in signal reception.
Features
1. MGC for both UL & DL.
2. AGC Alarms if interference occurs.
3. Auto shut off once severe self-oscillation.
4. LCD display to make operation easily.
5. Antenna isolation testing automatically.
6. High voice quality and fast data transmission.
7. Good Heat-dissipation.
8. Support five systems simultaneously.
Specs
|
Parameters |
Uplink |
Downlink |
|
|
Frequency Range |
LTE800 |
832 ~ 862MHz |
791 ~ 821MHz |
|
CDMA800 |
824-849MHz |
869-894MHz |
|
|
GSM&EGSM |
880 ~ 915MHz |
925 ~ 960MHz |
|
|
DCS |
1710 ~ 1785MHz |
1805 ~ 1880MHz |
|
|
PCS |
1850-1910MHz |
1930-1990MHz |
|
|
WCDMA |
1920 ~ 1980MHz |
2110 ~ 2170MHz |
|
|
LTE2600 |
2500~2570MHz |
2620 ~ 2690MHz |
|
|
Operation Bandwidth (-3dB) |
Wide Band |
||
|
Maximum Gain |
70dB |
75dB |
|
|
Output Power |
15dBm |
23dBm |
|
|
MGC (Manual Gain Control) |
31dB range/1dB step |
||
|
AGC (Automatic Gain Control) |
≧25dB |
||
|
Noise Figure |
≤ 6dB |
||
|
VSWR |
≦2.0 |
||
|
Group Delay |
≤1μs |
||
|
LED Alarm |
Power LED |
DC ON/OFF |
|
|
AGC LED |
Red, ALC≥10dB |
||
|
ISO LED |
Red, ALC≥25dB, RF stop working |
||
|
RF Connector |
N-Female |
||
|
Impedance |
50Ω |
||
|
Power Consumption |
5W |
||
|
Power Supply |
Input: AC 110~240V; Output: DC 10V/10A |
||
|
Operating Temperature |
-10℃~50℃ |
||
|
Environment Conditions |
IP30 |
||
|
Dimensions (Lx W x H) |
310*170*65mm |
||
|
Weight (N.W) |
≤6KG |
||
Hot Tags: mobile phone repeater, China mobile phone repeater manufacturers, suppliers, factory, phone magnifier amplifier, free shiping amplifier, Cellular signal amplifier, Mobile Signal Booster, profesional signal amplifier, Mobile Signal Repeater
