A band selective repeater, commonly referred to as a cell phone signal booster, is a tool that aids in boosting flimsy cell phone signals in locations with low signal strength. Using a mobile signal enhancer may provide the following advantages:
1. Better call quality: If the signal is weak where you are, you can experience dropped calls, crappy call quality, or calls that don't connect at all. For better calls and fewer dropped calls, a mobile signal booster can assist strengthen the signal.
2. Faster data speeds: In addition to enhancing call quality, a mobile signal booster can help speed up your internet connection. You might be able to use apps that require a strong connection and stream videos without buffering more rapidly with a stronger signal.
For anyone who needs to strengthen their cell phone signal, whether for personal or professional use, a band selective repeater can be a handy tool. A band selective repeater can only magnify an existing signal; it cannot produce a signal where one does not already exist.
Features
1. MGC available for both UL & DL.
2. AGC Alarms if interference occurs.
3. Auto shut off once severe self-oscillation.
4. Intelligent mode setting.
6. Antenna isolation testing automatically.
7. High voice quality and fast data transmission.
8. Ideal solution for operators.
Specs
|
Parameters |
Uplink |
Downlink |
|
|
Frequency Range |
LTE800 |
832 ~ 862MHz |
791 ~ 821MHz |
|
GSM&EGSM |
880 ~ 915MHz |
925 ~ 960MHz |
|
|
DCS |
1710 ~ 1785MHz |
1805 ~ 1880MHz |
|
|
WCDMA |
1920 ~ 1980MHz |
2110 ~ 2170MHz |
|
|
LTE2600 |
2500~2570MHz |
2620 ~ 2690MHz |
|
|
Bandwidth |
various bandwidth is available upon request |
||
|
Maximum Gain |
≥ 60dB |
≥ 70dB |
|
|
Output Power |
≥ 10dBm |
≥ 20dBm |
|
|
MGC (Manual Gain Control) |
31dB |
||
|
AGC (Automatic Gain Control) |
≧ 25dB |
||
|
Spurious Emission |
9KHz~1GHz |
≦ -36dBm |
|
|
1GHz~12.75GHz |
≦ -30dBm |
||
|
Inter-modulation Products |
9KHz~1GHz |
≦ -36dBm |
|
|
1GHz~12.75GHz |
≦ -30dBm |
||
|
Noise Figure |
≦ 6dB |
||
|
Out of Band Gain |
±400KHz |
< 50dB |
|
|
±600KHz |
< 40dB |
||
|
±1MHz |
< 35dB |
||
|
±5MHz |
< 25dB |
||
|
VSWR |
≦ 2.0 |
||
|
Group Delay |
≦1μs |
||
|
LED Alarm |
Power LED |
DC ON/OFF |
|
|
AGC LED |
Alarm Red when ALC control over 10dB |
||
|
ISO LED |
Alarm turns Red when ALC≥25dB, RF stop working |
||
|
RF Connector |
N-Female |
||
|
Impedance |
50Ω |
||
|
Power Consumption |
25W |
||
|
Power Supply |
Input: AC 110~240V; Output: DC 5.9V/3A |
||
|
Operating Temperature |
-10℃~50℃ |
||
|
Environment Conditions |
IP30 |
||
|
Dimensions (Lx W x H) |
128*170*65mm |
||
|
Weight (N.W) |
≤1.5KG |
||






Hot Tags: band selective repeater division, China band selective repeater division manufacturers, suppliers, factory, Indoor Band Selective Repeater, LTE signal booster, Vodafone Signal Booster RF booster, Channel Selective Repeater, 6G signal booster, Band Selective Repeater Wireless






















