Rural areas cell phone signal boosters should be very good at boosting the signal. I’ve only ever used them inside buildings that blocked cell phone signals, but they worked well there.
The cell phone signal booster has a much better antenna and it is usually placed in an optimum position. That tends to make it work much better.
There are different types of cell phone signal boosters that we are offering now. An active booster, or a repeater, is dedicated to a specific cell phone provider. This type will often provide better signal boosting for that service, but it will do nothing for other cell phone services.
A passive system may be as simple as two good antennas connected by a coaxial cable. One is mounted in an ideal location for good reception, like on a tower. The second is mounted closer to where the cell phones will be. This system will work with any cell service that uses frequencies the antennas can receive.
Features
1. MGC for both UL & DL.
2. AGC Alarms if interference occurs.
3. Auto shut off once severe self-oscillation.
4. LCD display to make operation easily.
5. Antenna isolation testing automatically.
6. High voice quality and fast data transmission.
7. Good Heat-dissipation.
Specs
|
Parameters |
Uplink |
Downlink |
|
|
Frequency Range |
LTE800 |
832 ~ 862MHz |
791 ~ 821MHz |
|
CDMA800 |
824-849MHz |
869-894MHz |
|
|
GSM&EGSM |
880 ~ 915MHz |
925 ~ 960MHz |
|
|
DCS |
1710 ~ 1785MHz |
1805 ~ 1880MHz |
|
|
PCS |
1850-1910MHz |
1930-1990MHz |
|
|
WCDMA |
1920 ~ 1980MHz |
2110 ~ 2170MHz |
|
|
LTE2600 |
2500~2570MHz |
2620 ~ 2690MHz |
|
|
Operation Bandwidth (-3dB) |
Wide Band |
||
|
Maximum Gain |
60dB |
65dB |
|
|
Output Power |
10dBm |
10dBm |
|
|
MGC (Manual Gain Control) |
31dB range/1dB step |
||
|
AGC (Automatic Gain Control) |
≧25dB |
||
|
Noise Figure |
≤ 6dB |
||
|
VSWR |
≦2.0 |
||
|
Group Delay |
≤1μs |
||
|
LED Alarm |
Power LED |
DC ON/OFF |
|
|
AGC LED |
Red, ALC≥10dB |
||
|
ISO LED |
Red, ALC≥25dB, RF stop working |
||
|
RF Connector |
N-Female |
||
|
Impedance |
50Ω |
||
|
Power Consumption |
5W |
||
|
Power Supply |
Input: AC 110~240V; Output: DC 9V/5A |
||
|
Operating Temperature |
-10℃~50℃ |
||
|
Environment Conditions |
IP30 |
||
|
Dimensions (Lx W x H) |
228*170*65mm |
||
|
Weight (N.W) |
≤2.9KG |
||






Hot Tags: cell phone signal booster for rural areas, China cell phone signal booster for rural areas manufacturers, suppliers, factory, 5G Signal Booster, RF radio signal amplifier, 4G Signal Booster for Home, Cell Booster Network Repeater, mobile phone video amplifier, T Mobile Signal Booster






















